|
NB4 4CH RX WITH PN 18A BL ESC
|
|
|
|
|
|
Description:
|
This is a micro Sensor-less Brushless ESC integrated with NB4 Receiver. It could be used for 1/28 1/24 and 1/18 2WD or AWD micro RC car.
NB4 Receiver Features:
* The receiver is compatible with PL18/NB4 and NB4 Lite all the transmitters which with AFHDS 3 protocol
* 4 Channel high speed servo output
NB4 Receiver Specification:
PWM Channels: 4
RF: 2.4GHz
2.4G Protocol: AFHDS 3
Distance: >50m(ground)
Antenna: Single Antenna(32mm)
RSSI: Yes
Data Output: PWM
ESC Features:
Specially designed for RC car and truck, with excellent starting up, acceleration and linearity features
Compatible with sensor-less brushless motor
3running modes suitable for different applications
Forward with brake mode / Forward-Backward with Brake mode / Forward-Backward no Brake Mode
4 steps of maximum reverse force adjustment
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag brake force adjustment and 4 steps of initial brake force adjustment
9 start modes from “Short” to “Smooth” to be suitable for different chassis, tires and tracks
7 multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection
8 steps of timing adjustment
User programmable. Supported as: The “SET” button on the ESC, the digital LED Programmer
*** this esc can be programmed using DSK-171 ESC programmer**
**it is theoretically possible to use up to 9000KV sensorless motor with this esc**
ESC Specification:
Continues Current: 18A
Burst Current: 48A
Resistance: 0.01 ohm
Battery: 2S Li-Po/Li-Ion or 4-6 cells NiMH
BEC Output: 5V/3A
Size: 37mm x 20 mm x 7mm
Package Included:
1 x RX-ESC
4 x 1.5mm 3P JST plug with high quality silicon cable
12 x 100mm high quality silicon cable (3 blue, 3 yellow, 5 black, 1 red)
4 x PH2.0 3P plug (for battery connection)
|
Attachments:
|
|
|
|
|
|
